Clearance & Air Testing
Clearance air testing on Type 3 asbestos jobs (the 0.01 f/cc pass line, PCM versus TEM). Post-remediation checks after mould work.
Is a clearance test required after Type 2 asbestos work in Ontario?
No, Ontario's asbestos regulation does not require a clearance air test after Type 2 work. Section 18 of O. Reg. 278/05 is the only place clearance...
Is air testing useful after mould removal in an Ottawa house?
Air testing after mould removal can be useful, but it is not required by law in Ontario, and what it tells you depends on when and how it is done....
What does 0.01 fibres per cubic centimetre mean for my Ottawa job?
The 0.01 fibres per cubic centimetre figure is the clearance threshold set by O. Reg. 278/05, section 18, for the PCM air-sampling method. Every air...
What is a clearance air test after asbestos removal in Ontario?
A clearance air test is the air test O. Reg. 278/05 requires inside the enclosure after Type 3 asbestos removal, once the enclosure is dry. Published...